* 최상급 튜닝-케이블(전문튜닝용)
* 미국,유럽등지에서 이미 점화케이블의 명품으로 인정받은 매그너코어-케이블
Magnecor Race Wires are also used on many race engines competing worldwide
* 재질
-WIRE : ALL 최상급 실리콘(TC-1500-HS High Strength Aerospace Grade Silicone Rubber)
-BOOT'S & CAP : ALL 최상급 실리콘
* 지름 : 8.5MM
* 색상 : RED
* 전도체 : 스테인레스-스틸(thick)

Magnecor's KV85 Competition (8.5mm) and R-100 Racing (10mm) Ignition Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace grade silicone rubber, and its single layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources.
The KV85 8.5mm jacket has a service heat resistance of 600 degrees F (320 degrees C) and up to 1,000 degrees F (540 degrees C) for short burst 3 minutes. The R-100 10mm jacket has a service heat resistance of 700 degrees F (380 degrees C) and up to 1,200 degrees F (650 degrees C) for short burst 3 minutes. Even if limits are exceeded, the silicone rubber will retain its insulating ability until wires are removed from engine.

Magnecor Race Wires are primarily designed and constructed to be used in applications where it is essential to prevent the possibility of ignition wires compromising engine performance. Modern race engines, modified street engines and stock street engines which rely on electronic devices to control the function of either or both the ignition and fuel systems are prone to interference from all other spiral conductor ignition wires sold through performance parts outlets, none of which can provide proper suppression for EMI, particularly if a high-output ignition system is used.

We always recommend use of our Race Wires for any stock or modified late model street engine that is electronically managed, however most other modified or street engines can also use our Race Wires to improve ignition performance

Magnecor Race Wires, both Magnecor KV85 Competition (8.5mm) and R-100 Racing (10mm) Ignition Cables, are used extensively throughout the world by leading racers and performance minded street vehicle owners to maximize the efficiency of their vehicle's ignition system. Magnecor Race Wires are the only ignition wires that can carry the full output of racing ignition systems while providing superior EMI suppression for electronically managed engines and superior heat resistance.
Magnecor Race Wires are used on many serious race engines, such as current engines used in the USA in NASCAR, Winston Cup, Grand National and Super Truck series, SCCA (including successful factory vehicles and other series winners), IMSA, NHRA etc. Magnecor Race Wires are also used on many race engines competing worldwide; Australians would be interested to know most successful Touring Cars, including most cars running at Bathurst, use Magnecor Race Wires. Magnecor Race Wires have been successfully run on many 5,000+HP Top Fuel engines. However, unlike all other performance wires, Magnecor Race Wires can be used to improve ANY street engine ignition performance ? because they provide EMI suppression!

Magnecor Race Wires' superior heat resistance also makes them ideal for use in the extreme heat experienced by commercial vehicles, industrial vehicles, industrial engines and generators, military vehicles, and motorhomes. Marine engines can also benefit from Magnecor Race Wires' superior RFI suppression and water sealing abilities.

Unlike the majority of ignition wire brands that have proliferated the performance market in recent years, Magnecor Race Wires are not just branded cheaply constructed generic spiral conductor ignition wires that most performance parts promoters like to include in their product lines to sell through speed shops and mass-merchandisers in the USA.