* 최상급 튜닝-케이블(전문튜닝용)
* 미국,유럽등지에서 이미 점화케이블의 명품으로 인정받은 매그너코어-케이블
Magnecor Race Wires are also used on many race engines competing worldwide
* 재질
-WIRE : ALL 최상급 실리콘(TC-1500-HS High Strength Aerospace Grade Silicone Rubber)
-BOOT'S & CAP : ALL 최상급 실리콘
* 지름 : 8.5MM
* 색상 : RED
* 전도체 : 스테인레스-스틸(thick)
Magnecor's KV85 Competition (8.5mm) and R-100
Racing (10mm) Ignition Cables feature Magnecor's exclusive 2.5mm high capacity
Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire
precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating
jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace
grade silicone rubber, and its single layer construction will prolong the jacket's
insulating ability by conducting extreme heat away from hot-spots that occur
near over-the-limit heat sources.
The KV85 8.5mm jacket has a service heat resistance of 600 degrees F (320 degrees
C) and up to 1,000 degrees F (540 degrees C) for short burst 3 minutes. The
R-100 10mm jacket has a service heat resistance of 700 degrees F (380 degrees
C) and up to 1,200 degrees F (650 degrees C) for short burst 3 minutes. Even
if limits are exceeded, the silicone rubber will retain its insulating ability
until wires are removed from engine.
Magnecor Race Wires are primarily designed and constructed to be used in applications
where it is essential to prevent the possibility of ignition wires compromising
engine performance. Modern race engines, modified street engines and stock street
engines which rely on electronic devices to control the function of either or
both the ignition and fuel systems are prone to interference from all other
spiral conductor ignition wires sold through performance parts outlets, none
of which can provide proper suppression for EMI, particularly if a high-output
ignition system is used.
We always recommend use of our Race Wires for any stock or modified late model
street engine that is electronically managed, however most other modified or
street engines can also use our Race Wires to improve ignition performance
Magnecor Race Wires, both Magnecor KV85 Competition
(8.5mm) and R-100 Racing (10mm) Ignition Cables, are used extensively throughout
the world by leading racers and performance minded street vehicle owners to
maximize the efficiency of their vehicle's ignition system. Magnecor Race Wires
are the only ignition wires that can carry the full output of racing ignition
systems while providing superior EMI suppression for electronically managed
engines and superior heat resistance.
Magnecor Race Wires are used on many serious race
engines, such as current engines used in the USA in NASCAR, Winston Cup, Grand
National and Super Truck series, SCCA (including successful factory vehicles
and other series winners), IMSA, NHRA etc. Magnecor Race Wires are also used
on many race engines competing worldwide; Australians would be interested to
know most successful Touring Cars, including most cars running at Bathurst,
use Magnecor Race Wires. Magnecor Race Wires have been successfully run on many
5,000+HP Top Fuel engines. However, unlike all other performance wires, Magnecor
Race Wires can be used to improve ANY street engine ignition performance ? because
they provide EMI suppression!
Magnecor Race Wires' superior heat resistance
also makes them ideal for use in the extreme heat experienced by commercial
vehicles, industrial vehicles, industrial engines and generators, military vehicles,
and motorhomes. Marine engines can also benefit from Magnecor Race Wires' superior
RFI suppression and water sealing abilities.
Unlike the majority of ignition wire brands that have proliferated the performance
market in recent years, Magnecor Race Wires are not just branded cheaply constructed
generic spiral conductor ignition wires that most performance parts promoters
like to include in their product lines to sell through speed shops and mass-merchandisers
in the USA.
|